RME Fireface UFX+ – Ultimate Support MC-125

RME FIREFACE UFX+ specs Clocking System Clocks: Internal, ADAT, AES, MADI, Wordclock Low Jitter Design: 30 dB (2.4 kHz) Effective Clock Jitter Influence on AD and DA Conversion: Near zero PLL ensures zero dropout, even at more than 100 ns jitter Digital Bitclock PLL for trouble-free Varispeed ADAT operation Supported Sample Rates: 28 kHz up to 200 kHz Analog Input A/D, Line In 1-8, Rear A/D Resolution: 24-bit Signal to Noise Ratio (SNR): 113 dB RMS unweighted, 116 dBA Frequency Response @ 44.1 kHz, -0.1 dB: 5 Hz to 20.8 kHz Frequency Response @ 96 kHz, -0.5 dB: 3 Hz to 45.8 kHz Frequency Response @ 192 kHz, -1 dB: 2 Hz to 92 kHz THD: <-110 dB, <0.00032 % THD+N: <-104 dB, 110 dB Maximum Input Level: +19 dBu Input: 1/4" (6.3 mm) TRS, electronically balanced Input Impedance: 8 kOhms unbalanced, 12 kOhms balanced Input Sensitivity Switchable: Lo Gain, +4 dBu Input Level for 0 dBFS @ Lo Gain: +19 dBu Input Level for 0 dBFS @ +4 dBu: +13 dBu Variable Gain: 0 to +12 dB Minimum Level for 0 dBFS: +1 dBu, -1.2 dBV Microphone In 9-12, Front As A/D, but: Input: XLR, electronically balanced Input impedance: 3.4 kOhms Signal to Noise Ratio (SNR): 115 dB RMS unweighted, 118 dBA Gain Range: 75 dB Maximum Input Level, Gain 0 dB: +18 dBu Maximum Input Level, Gain 75 dB: -57 dBu Clip LED: 0 dBFS Signal LED: -60 dBFS Instrument In 9-12, Front As A/D, but: Input: 1/4" (6.3 mm) TS, unbalanced Input Impedance: 1 MOhm Signal to Noise Ratio (SNR): 114 dB RMS unweighted, 118 dBA Gain Range: 42 dB Maximum Input level, Gain 8 dB: +21 dBu Maximum Input level, Gain 50 dB: -21 dBu Analog Output D/A, Line Out 3-8, Rear Resolution: 24 bit Dynamic Range (DR): 115 dB RMS unweighted, 118 dBA Frequency Response @ 44.1 kHz, -0.5 dB: 5 Hz to 20.8 kHz Frequency Response @ 96 kHz, -0.5 dB: 5 Hz to 45 kHz Frequency Response @ 192 kHz, -1 dB: 5 Hz to 89 kHz THD: <-110 dB, <0.00032 % THD+N: <-104 dB, 110 dB Maximum Output Level: +19 dBu Output: 1/4" (6.3 mm) TRS jack, servo-balanced Output Impedance: 75 Ohms unbalanced, 150 Ohms balanced Output Level Switchable: Hi Gain, +4 dBu, -10 dBV Output Level at 0 dBFS @ Hi Gain: +19 dBu Output Level at 0 dBFS @ +4 dBu: +13 dBu Output Level at 0 dBFS @ -10 dBV: +2 dBV D/A, Stereo Monitor Output XLR 1-2 As DA, but: Output: XLR, balanced Output Level Switchable: 24 dBu, Hi Gain, +4 dBu, -10 dBV Output Level at 0 dBFS @ 24 dBu: +24 dBu Output Level at 0 dBFS @ Hi Gain: +19 dBu Output Level at 0 dBFS @ +4 dBu: +13 dBu Output Level at 0 dBFS @ -10 dBV: +2 dBV D/A, Stereo Monitor Output Phones 9-12 As D/A, but: Output: 2 x 1/4" (6.3 mm) TRS stereo jack, unbalanced Maximum Output Level at 0 dBFS, High: +19 dBu Maximum Output Level at 0 dBFS, Low: +2 dBV Output Impedance: 2 Ohm Maximum Power per Channel @ 32 Ohm load, 0.1% THD: 210 mW (2.6 Vrms, +10.5 dBu) MIDI 2 x 5-pin DIN MIDI I/O (front panel) 2 x 5-pin DIN MIDI I/O (rear panel) Galvanically isolated by opto-coupled input Hi-Speed Mode: Jitter and response time typically below 1 ms Separate 128 byte FIFOs for input and output 1 x MIDI I/O via MADI Invisible transmission via User bit of channel 56 (up to 48 kHz) Invisible transmission via User bit of channel 28 (up to 96 kHz) Digital Input MADI Optical via FDDI duplex SC connector 62.5/125 and 50/125 compatible Coaxial via BNC (Wordclock input), 75 Ohms High-sensitivity input stage (<0.2 V p-p) Accepts 56 channel and 64 channel mode, plus 96k Frame Standard: Up to 64 channels 24-bit 48 kHz S/MUX: Up to 32 channels 24-bit 96 kHz S/MUX4: Up to 16 channels 24-bit 192 kHz Lock Range: 25 kHz to 54 kHz Jitter When Synced to Input Signal: <1 ns AES/EBU 1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992 High-sensitivity input stage (< 0.3 V p-p) S/PDIF compatible (IEC 60958) Accepts Consumer and Professional format Lock Range: 27 kHz to 200 kHz Jitter When Synced to Input Signal: 30 dB (2.4 kHz) ADAT Optical 2 x TOSLINK, format according to Alesis specification Standard: 2 x 8 channels 24-bit, up to 48 kHz Double Speed (S/MUX): 2 x 4 channels 24-bit 96 kHz Quad Speed (S/MUX4): 2 x 2 channels 24-bit 192 kHz Bitclock PLL ensures perfect synchronization even in Varispeed operation Lock range: 31.5 kHz to 50 kHz Jitter When Synced to Input Signal: <1 ns S/PDIF Optical (ADAT2) 1 x Optical, according to IEC 60958 Accepts Consumer and Professional format Lock Range: 27 kHz to 200 kHz Jitter When Synced to Input Signal: 30 dB (2.4 kHz) Wordclock 1 x BNC Internal termination 75 Ohms switchable Automatic Double/Quad Speed detection and internal conversion to Single Speed SteadyClock guarantees super low jitter synchronization even in Varispeed operation Not affected by DC-offsets within the network Signal Adaptation Circuit: Signal refresh through auto-center and hysteresis Overvoltage protection Level Range: 1.0 V p-p to 5.6 V p-p Lock Range: 27 kHz to 200 kHz Jitter When Synced to Input Signal: < 1 ns Jitter Suppression: >30 dB (2.4 kHz) Digital Output MADI Optical via FDDI duplex SC connector 62.5/125 and 50/125 compatible Cable Length: Up to 6562' (2000 m) Coaxial via BNC, 75 Ohms Output voltage 600 mV p-p Cable Length: up to 328' (100 m) Generates 56 channel and 64 channel mode, plus 96k Frame Standard: Up to 64 channels 24-bit 48 kHz S/MUX / 96k Frame: Up to 32 channels 24-bit 96 kHz S/MUX4: Up to 16 channels 24-bit 192 kHz AES/EBU 1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992 Output level Professional 4.5 V p-p, Consumer 2.6 V p-p Format Professional according to AES3-1992 Amendment 4 Format Consumer (SPDIF) according to IEC 60958 Single Wire mode, sample rate 28 kHz up to 200 kHz ADAT 2 x TOSLINK Standard: 2 x 8 channels 24-bit, up to 48 kHz Double Speed (S/MUX): 2 x 4 channels 24-bit 96 kHz Quad Speed (S/MUX4): 2 x 2 channels 24-bit 192 kHz S/PDIF Optical (ADAT2) Format Consumer (S/PDIF) according to IEC 60958 Sample rate 28 kHz up to 200 kHz Wordclock 1 x BNC Maximum Output Voltage: 5 V p-p Output Voltage @ 75 Ohms Termination: 4.0 V p-p Output Impedance: 10 Ohms Frequency Range: 27 kHz to 200 kHz Operating Environment Temperature Range: 41 up to 122°F (+5 up to +50°C) Relative Humidity: <75%, non condensing Power Requirements 100~240 VAC, 50/60 Hz Idle Power Consumption: 19 W Typical Power Consumption: 22 to 25 W Dimensions (WxDxH) 19 x 8.5 x 1.73" (483 x 210 x 44 mm) – with rack ears Weight 6.6 lb, (3 kg) Packaging Info Package Weight 12.5 lb Box Dimensions (LxWxH) 22.0 x 12.4 x 4.6"