Dynaudio Professional M3XE Studio Main Systems (Right Side)


SKU: 723707236816 Categories: , Tags: , , ,

Our M Series is the ultimate main monitoring solution, combining world-class driver and cabinet technology from Dynaudio.


The Dynaudio Professional M3XE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor – the renowned M3A 3-way monitor. Each speaker is powered by a four channel PLM 12k44 amplifier from Lab.gruppen.
With the newest and most pristine Dynaudio ESOTAR² driver technology, M3XE takes over where most other monitor systems give up. With unsurpassed attention to detail, underpinned by an impressive 22Hz – 21kHz frequency response and beyond 135dB SPL, M3XE leaves no room for desire in terms of resolution, range or sheer power.
Different from its sister monitor M3VE, a set of M3XE’s is powered by not one, but two 12k44 Lab.gruppen amplifiers, using the integrated Lake active cross-over processing as well as powering the HF, MF and dual LF woofers by the four independent amplifier channels of the 12k44.
Please visit http://labgruppen.com/series/plm-series for more info.
In short, M3XE surpasses any and all main monitor expectations!


  • Unique linear phase frequency response
  • Frequency Response: 22 Hz – 21 kHz
  • Dual 12″ ESOTAR Woofers, aluminum voice coil
  • Dual 6″ Midrange drivers, MSP cone, 75mm aluminum voice coil
  • 1.1″ (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil
  • Max. SPL (short term peak @ 1m): 135 SPL
  • Heavy internal damping for minimum cabinet resonance

Design Principles
Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.
Utmost care in selection of materials and production combined with the industry’s most thorough and extensive testing program allow our monitors to achieve 100 percent consistency – not just between different pairs, but also when crossing pairs or relying on pairs in different locations.
And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.


System: 3-way Active Main Monitor Frequency Response (+/- 3 dB): 22 Hz – 21 kHz Peak SPL 1m, pair (IEC Short Term): > 135 dB peak Resonance Frequency: 24 Hz Internal Cabinet Volume: 145 liters Bass Principle: Bass reflex Amplifier: 1 Lab-gruppen PLM10000Q (pr. speaker). Preset: M3XE V06 Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material Midranges: 15 cm with 75 mm diameter pure alu wire voice coil, MSP-cone, long stroke Woofers: Esotar 30 cm with 75 mm diameter pure cupper wire voice-coil, MSP-cone, long stroke Weight: 65 kg. Dimensions (WxHxL): 555 x 775 x 505 mm Cabinet: 25 mm MDF. Strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer. Crossover: All 4 channels: Active dsp-based in-amp Lake processor. Each channel has impedance-correction providing the best working conditions for the ampflifier. Technical Specifications – 12k44 Model: 12k44 Number of amplifier channels: 4 Max out Power per Channel (4 ohms, all channels driven): 3000 W THD + N at 1 kHz and 1 dB below clipping: < 0.04 % Dynamic Range: > 114 dB Channel separation (Crosstalk) at 1 kHz: > 70 dB Inputs: Analog, AES/EBU & Dante Analog Input Sample Rate / Resolution: 96 kHz / 24 bit Weight: 16.5 kg (36 lbs) Dimensions (WxHxD): 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")


Dynaudio Professional M3XE Studio Main Systems (Right Side)


There are no reviews yet.

Be the first to review “Dynaudio Professional M3XE Studio Main Systems (Right Side)”

Your email address will not be published.

Open chat
Hola como le puedo ayudar