Dynaudio Acoustics BM6A – 2-Way Active 6.5″ Nearfield Monitors (Single)


SKU: 5706937494572 Categories: , Tags: , , ,

Dynaudio Acoustics BM6A Overview

The Dynaudio Acoustics BM6A is a 2-way, Active studio monitor powered by twin 50 Watt amplifiers, featuring a 6.5″ woofer and a 1″ dome tweeter, housed in a no-nonsense cabinet with a black and aluminum finish, and sold as a pair.

The cabinet interior has been treated with damping material to minimize aberrant, vibration-related distortion, and the fluid-protected tweeter features a rear acoustic chamber. The amps are convection cooled, and there are a pair of front panel LED’s indicating power, and overdrive or thermal protection activity, respectively.

The rear panel of the BM6A is refreshingly minimalist, featuring a trio of High, Mid and Low frequency boost/cut switches, a balanced or unbalanced level sensitivity switch, and a dedicated High Pass filter switch. The lone connector is a balanced XLR female. The frequency switches are provided for subtle adjustment to the given room environment, not playback enhancement.

The BM6A is actually about this: if your mix is really good, it’ll sound really good, and if it isn’t, it won’t. Neutrality, and balanced, un-hyped frequency delivery on playback, should be the objective in studio monitor speaker design. There are many active monitors available to choose from these days , and neutrality is both a manufacturing boast, and an engineering holy grail, that the BM6A actually delivers.

2-Way Active Monitors with dual 100-Watt amplifiers and electronic crossover
Full magnetic shielding for use in close proximity to computer monitors
Unique linear phase and frequency response ensures neutral playback, minimizes listening fatigue
Interior damping of speaker cabinet minimizes resonance and vibration-related distortion
Thermally protected tweeter with rear acoustic chamber
Slow-attack optical High-Frequency Limiter
Overdrive protection circuitry for Low-Frequency amplifier with True Clipping front panel LED indicator
Input sensitivity level switch for balanced or unbalanced operation
High and Low-Frequency trim controls with 5dB range for subtle adjustment to room acoustic environment
High-Frequency control from 3kHz upward, Low-Frequency control from 100Hz downward
XLR Connector
Switchable 115-230 VAC power supply for international use

Dynaudio Acoustics BM6A Specs Studio Monitor Monitor Type Active 2-Way Enclosure Sealed, Shielded Drivers HF Driver: 1 x 1" / 25 mm Soft Dome Tweeter with 0.15" / 4 mm Voice Coil LF Driver: 1 x 6.5" / 16.5 cm Polypropylene Cone with 3" / 7.62 cm Voice Coil Amplification HF Amplifier: Rated at 100 W LF Amplifier: Rated at 100 W Performance Frequency Response 41 Hz to 21 kHz ± 3 dB Maximum Sound Pressure Level (SPL) 118 dB Crossover Crossover Frequency 2.2 kHz, 24 dB/Octave Slope Crossover Type Active Connectivity I/O 1 x 3-Pin XLR Balanced Analog Input 1 x RCA Unbalanced Analog Input General Dimensions (W x H x D) 8.5 x 13.3 x 12.6" / 217 x 338 x 321 mm Weight 24.2 lb / 11.0 kg Packaging Info Package Weight 29.3 lb Box Dimensions (LxWxH) 17.25 x 16.5 x 12.6"


Dynaudio Acoustics BM6A – 2-Way Active 6.5" Nearfield Monitors (Single) 2 x Power Cable Owner's Manual Limited 1-Year Warranty


There are no reviews yet.

Be the first to review “Dynaudio Acoustics BM6A – 2-Way Active 6.5″ Nearfield Monitors (Single)”

Your email address will not be published.

Open chat
Hola como le puedo ayudar