Allen & Heath DX168 – Allen & Heath AP9932


SKU: 723707239954 Categories: ,

The rugged DX168 Portable DX Expander from Allen & Heath adds remote inputs and outputs to the dLive S Class or C Class mixing systems. It features 16 XLR mic/line inputs, with independent phantom power LED indicators, along with eight XLR line outputs. The expander connects to the dLive system via a Cat 5 cable (sold separately), allowing for the inputs and outputs to be positioned up to 330′ away from the mixer.

Up to six DX168 units can be added to a dLive system for a total of 96 inputs and 48 outputs, and Cascade mode allows daisy-chaining of two DX168 expanders for additional inputs and outputs. The sturdy and versatile design of the expander and hard-wearing rubber bumpers allow it to be placed directly on the stage floor during performances or rack-mounted in a standard 19″ rack or case (requires a remote audio rack kit—sold separately). It also comes with a carry handle for convenience and portability.

16 mic preamps on XLR
Redundant DX connection to dLive S Class hardware
Plug-and-play, no IP addressing required

Inputs XLR Mic/Line Inputs Balanced, 48 V phantom power Mic/Line Preamp: Fully recallable Input Sensitivity: -60 to 15 dBu Analogue Gain: 5 to 60 dB, 1 dB steps Pad: -20 dB active pad Maximum Input Level: 30 dBu (pad in) Input Impedance: >4 kOhms (pad out), >10 kOhms (pad in) Mic/Line Channel Noise 22 Hz to 22 kHz, direct output at unbalanced output Mic EIN: -127 dB with 150 Ohm source Unity Gain (Pad In): -90 dBu Low Gain (5 dB, Pad Out): -96 dBu Mid Gain (30 dB, Pad Out): -90 dBu Mic/Line Channel THD+N 22 Hz to 22 kHz, direct output at unbalanced output Unity Gain (Pad In): 0.003% -88 dBu at 1 kHz, 0 dBu output Low Gain (5 dB, Pad Out): 0.002% -93 dBu at 1 kHz, 0 dBu output Mid Gain (30 dB, Pad Out): 0.003% -88 dBu at 1 kHz, 0 dBu output Sample Rate 96 kHz Outputs XLR Outputs Balanced, relay protected Output Impedance: <75 Ohms Nominal Output: 4 dBu = 0 dB meter reading Maximum Output Level: 22 dBu Residual Output Noise: -92 dBu (muted, 20 to 20 kHz) General Operating Temperature 32 to 95°F / 0 to 35°C Mains Power 100 to 240 VAC, 50/60 Hz Power Consumption 40 W maximum Dimensions 16.1 x 7.5 x 7.3" / 41.0 x 19.0 x 18.5 cm Weight 10.1 lb / 4.6 kg Packaging Info Package Weight 15.35 lb Box Dimensions (LxWxH) 23.3 x 13.1 x 13.1"

In the box

– Allen & Heath DX168 – Allen & Heath AP9932


There are no reviews yet.

Be the first to review “Allen & Heath DX168 – Allen & Heath AP9932”

Your email address will not be published. Required fields are marked *

Open chat
Hola como le puedo ayudar